Cadac CDC four Manuel d'utilisateur télécharger pdf (Page 11)

Revision 1 2012-13CDC FOUR

Mechanical details

NOTE: when installing the CDC FOUR in a permanent or semi-permanent

situation, an additional allowance must be made at the rear of the console for

connectors and cables.

Fitting the rack mounting kit

The CDC FOUR is supplied with a pair of rack mounting brackets which permit

the mixer to be installed in a standard 19” equipment rack.

To install the brackets, remove the three upper screws (those closest to the mixer

control surface) which secure each metal end cheek to the chassis. Fit the rack

mounting brackets over the end cheeks and ret the three screws. Note that

the brackets are handed (i.e., one is designed to t on the left hand side of the

console and the other to the right). This is indicated by an ‘L’ or ‘R’ label afxed

to the bracket.

569.6

180.8

85.5

520.0

9.2

436.0

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 82 83

Pas de commentaire

Cadac CDC four Manuel d'utilisateur Page 11