Cadac C-Type Manuel d'utilisateur télécharger pdf (Page 19)

Input channel module 7911 2-5

Revision C2005-2 C-Type

514146 +)#(4#%HOO26KHOI#VZLWF K

Press this button to change the response of the equalizer from BELL (default

response) to SHELF.

514147 0)#4#FRQWURO

The Q-control varies the bandwidth of the boost/cut at the frequency chosen (Q is

only available at the default BELL response). A low Q-value gives a wide bandwidth.

This means that a relatively large range of frequencies, either side of the centre fre-

quency, have boost/cut applied. When the Q-value is high, the bandwidth is reduced

so that a much smaller range of frequencies have boost/cut applied.

514148 0)#)UHTXHQF\/#%RRVW2&XW#FRQWURO

Dual ganged control allow you to choose the “centre” frequency at which the boost/

cut is applied and to define the amount of boost or cut applied to the mid frequency

band.

514149 /)#4#FRQWURO

The Q-control varies the bandwidth of the boost/cut at the frequency chosen (Q is

only available at the default BELL response). A low Q-value gives a wide bandwidth.

This means that a relatively large range of frequencies, either side of the centre fre-

quency, have boost/cut applied. When the Q-value is high, the bandwidth is reduced

so that a much smaller range of frequencies have boost/cut applied.

51414: /)#)UHTXHQF\/#%RRVW2&X W#FRQWURO

Dual ganged control allow you to choose the “centre” frequency at which the boost/

cut is applied and to define the amount of boost or cut applied to the high frequency

band.

51414; /)#(4#%HOO26KHOI#VZLWFK

Press this button to change the response of the equalizer from BELL (default

response) to SHELF.

51414< (TXDOL]HU#,Q22XW

Press the EQ IN button to put the equalizer in the channel signal chain.

514153 +3#)LOWHU#,Q22XW

Press the HPF button to switch the high-pass filter In/Out of circuit.

514154 +3#)LOWHU#)UHTXHQF\#FRQWURO

Variable frequency control for choosing the frequency at which the filter starts to

“turn over” (also known as the knee or -3dB point for the filter). The “turn-over” fre-

quency is continuously variable from 15 to 400 Hz and provides a cut of 12dB/oct.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 65 66

Pas de commentaire

Cadac C-Type Manuel d'utilisateur Page 19